Thecus N4100PRO Manuel d'utilisateur télécharger pdf (Page 41)

Connecting DMAs to the Media Server

Next, it’s time to connect your Digital Media Adapter (DMA) to the media server:

1. Connect your DMA to your Media Server

a. Configure your DMA to use a Dynamic IP address. The IP address will

be assigned by the router.

b. Some DMAs are wireless enabled. You can connect the DMA to a

wireless router. For instructions on how to connect your DMA to a

wireless router, please refer to your DMA’s user manual.

2. Connect your DMA’s video output to video input of your TV set.

3. Turn on the TV and change the video signal input to DMA.

4. Setup the DMA (These steps will be different if you use a different DMA)

a. From the Server List screen, select “N4100PRO: Media Server” as

the server.

b. Go to My Media

c. Click on the Up/Down Arrow buttons to select Music Jukebox,

Photo Albums, or Video Clips

d. Start enjoying the contents stored in your N4100PRO.

HTTP/ Web Disk

From the System Network menu, choose the HTTP/ Web Disk item, and the

Web Disk (HTTP) Support screen appears. This screen displays the service

support parameters of the system. You can change any of these items and press

Apply to confirm your settings.

A description of each item follows:

Web Service

Item Description

HTTP (WebDisk) Support Enable or disable WebDisk support. Enter the port number if

this option is enabled. The port number is default 80.

HTTPs (Secure WebDisk)

Support

Enable or disable secure WebDisk support. Enter the port if this

option is enabled.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 132 133

Pas de commentaire

Thecus N4100PRO Manuel d'utilisateur Page 41