Thecus N4100PRO Manuel d'utilisateur télécharger pdf (Page 28)

Follow the steps below to upgrade your firmware:

1. Use the Browse button to find the firmware file.

2. Press Apply.

3. The beeper beeps and the Busy LED blinks until the upgrade is complete.

NOTE

• The beeper only beeps if it is enabled in the System Notification menu.

• Check Thecus website for the latest firmware release and release notes.

• Downgrading firmware is not permitted.

WARNING

Do not turns off the system during the firmware upgrade process.

This will lead to a catastrophic result that may render the system inoperable.

UPS Setting

The N4100PRO can also support various uninterruptible power supply units via

either “Serial” or “USB” interface, providing extra data security and accessibility in

the case of a power failure.

From the Status menu, choose the UPS item and the UPS Setting screen appears.

Make any changes you wish, and press Apply to confirm changes.

See the following table for a detailed description of each item.

UPS Setting

Item Description

UPS Monitoring Enable or disable UPS monitoring.

Manufacturer Choose the UPS manufacturer from the dropdowns.

Model Choose the UPS model number from the

dropdowns.

Battery Status Current status of the UPS battery

Power Current status of the power being supplied to the

UPS

Seconds between power failure and

first notification

Delay between power failure and first notification in

seconds.

Seconds between subsequent power

failure notifications

Delay between subsequent notifications in seconds.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 132 133

Pas de commentaire

Thecus N4100PRO Manuel d'utilisateur Page 28